
Hello, neighbor
Seamless Sheet Vinyl Flooring for Greater St. Louis Homes
Seamless sheet vinyl for laundry rooms, mudrooms, and rentals across Greater St. Louis - waterproof from wall to wall, installed in a day.
- ✓4.9 · 88 Google reviews
- ✓0% APR financing
- ✓Lowest-price guarantee
Schedule a free estimate
The simplest waterproof floor there is
Sheet vinyl was waterproof long before the industry had a marketing word for it, and the current product looks nothing like the pattern in your grandmother's kitchen. It comes off a roll in one wide piece, so a small room often has no seam at all. We put it in laundries, hall baths, mudrooms, and utility rooms in houses from the city out through O'Fallon, and it is still the fastest room-sized floor we install.
It is also the least expensive way to make a room genuinely water-safe. When a washer hose lets go on a second floor, a seamless sheet buys you time before the ceiling below finds out about it. If you want plank or tile looks instead, we carry both, but for a small wet room the economics of sheet goods are hard to argue with.

Rooms where we still recommend it first
Sheet vinyl is not trying to pass for white oak, and it does not need to. It is trying to be the most practical surface in the house, and in a handful of rooms it wins on cost and performance at the same time. These are the ones we steer people toward it for, usually after they have priced the same room in tile and decided the money is better spent somewhere else.
- Laundry rooms - one continuous sheet, no seams for a burst hose to find
- Small hall baths - fully waterproof for a fraction of a tile budget
- Mudrooms and back entries - winter salt and slush wipe right up
- Basement baths and utility rooms - inexpensive to replace if the lower level ever takes water
- Daycares, clinics, and shop floors - slip-resistant grades with heat-welded seams

Financing Through Hearth And Synchrony*
*Subject to credit approval. Applying takes a few minutes and does not commit you to a project. Ask about our veteran and first responder discounts when you schedule.
See financing optionsWhat we stock and what we would put in your house
We keep residential rolls at the Maryland Heights showroom in wood, stone, and plain patterns, and we order commercial grades with slip resistance and heat-welded seams for clinics, daycares, and shop floors. For a typical house, a mid-grade residential sheet is the right buy. It holds up for years, and it does not cost much to swap out when you finally remodel the room around it.
Step up to a commercial grade anywhere the floor gets wet-mopped daily or has to meet a slip standard, since a residential sheet will wear thin in that kind of service. And if you decide partway through that you want boards rather than a roll, luxury vinyl plank sits on the next rack over. We can price both at the same visit instead of scheduling another trip out to the house.

Installation is where sheet vinyl gets hard
Rolling out a twelve-foot sheet, scribing it to an out-of-square 1920s bathroom wall, and fitting it around a toilet flange without trapping a bubble is a real skill. Older houses in this area are rarely square, and felt-backed goods do not forgive a bad cut. We template the room, use full-spread or perimeter adhesive depending on the product, and heat-weld the seams on commercial jobs. The old floor and the debris go with us. Ask for a free estimate and we will measure it out.

Sheet vinyl pricing in Greater St. Louis
Installed prices, covering the material, adhesive, labor, and removal of the floor that is there now.
| Option | Typical price | Notes |
|---|---|---|
| Residential sheet vinyl | $3.50 - $5.25 / sq ft | Most household baths and laundries |
| Premium residential patterns | $5.25 - $7.00 / sq ft | Deeper texture, better wear layer |
| Commercial slip-resistant sheet | $7.00 - $10.50 / sq ft | Welded seams, mopped daily |
| Natural linoleum sheet | $9.00 - $12.50 / sq ft | Clinics and low-emission projects |
Subfloor repair and disposal are quoted up front, not billed as a surprise on the last day.
Sheet Vinyl Flooring - frequently asked questions
Usually sheet. A five-by-eight bath takes one piece with no seams at all, which is about as water-tight as a floor gets in that room, and it costs less to put in. Plank makes more sense once the space opens up and the look of individual boards starts to matter. We will price both if you want to see the difference in dollars before choosing.
A good residential sheet runs 15 to 20 years in a household bath or laundry. Commercial sheet with welded seams goes 25 years and up, even in a room that gets mopped every day. What ends most of them is a remodel rather than wear. People replace the vanity, look down, and decide the floor should match the new one.
Sometimes. If the existing floor is flat, still well bonded, and not deeply embossed, we can go over it and save you the demolition. If it is loose, cupped, or heavily textured, that texture will telegraph through the new sheet within months. We check on site and tell you which situation you have before the quote goes out.
That comes up often in older homes, especially around a toilet or under a washer that has been leaking quietly for a season. We cut out the bad section, replace it, and lay new underlayment before the sheet goes down. Covering rot with vinyl only hides it for a year. Customers mention that kind of mid-job find in their reviews fairly regularly.
Explore related flooring options
From the first call to the final sweep
Working with Veteran Flooring
Tell us what you have
Call {{phone}} or send us the rooms and square footage. We will set a time at your place, or you can stop by the showroom.
Measure and quote
Erik measures, checks the subfloor, and writes one price for the whole project, back to you within one business day.
Install with the owner on site
We protect the house, prep the subfloor, and lay the floor. {{ownername}} is there while the work happens.
Walk it and stand behind it
We clean up, walk every room with you, and back our labor for a full year on top of the manufacturer warranty.

Reviews
4.9 stars from 88 Google reviews, written by homeowners across Greater St. Louis.
Read what they said →
Free estimate
We measure the space and get one written price back to you within one business day.
Schedule yours →
Services
Installation, hardwood refinishing, repair, tear-out and subfloor prep, for homes and commercial spaces.
See what we do →What we stand for
What we hold ourselves to
The owner on site Dale Wyatt is on your job while the work happens. Questions about a transition, a stain color, or what we found under the old carpet get answered by the person accountable for the floor.
One honest number Erik measures the rooms and checks the subfloor before he quotes, so the written price covers the whole project. It does not grow halfway through the install.
Certified craft We are certified by the National Wood Flooring Association, bonded and insured, and our team carries more than 80 years of combined experience in this trade.
You hear from us You get a schedule, progress photos while the crew works, and a straight answer the day something under the old floor changes the plan.

Take a peek
See it in a real room
Browse hardwood, refinished oak, luxury vinyl and tile we have installed in {{areaName}} homes, then bring your favorites by the showroom.
Right around the corner
Serving families across Greater St. Louis
We work out of Maryland Heights and cover the city, mid-county, and St. Charles County: century-old brick two-flats, postwar ranches, and new builds alike. One hallway or the whole house, we will come look at it and give you a straight price.
- Maryland Heights, MO
- St. Louis, MO
- St. Charles, MO
- O'Fallon, MO
- St. Peters, MO
- Chesterfield, MO
- Florissant, MO
- Wentzville, MO
- Wildwood, MO
- University City, MO
- Ballwin, MO
- Kirkwood, MO
- Webster Groves, MO
- Hazelwood, MO
- Creve Coeur, MO
Good to know
Straight answers about your floor.
Here is what homeowners in {{areaName}} ask us most: view our full FAQ
Fresh off the press
Industry guidance at your fingertips
Request a consultation
Meet with one of our skilled project specialists to get started
Featured Brands & Technologies















