
Hello, neighbor
Hardwood Flooring Installed Across Greater St. Louis
Solid and engineered hardwood from Mirage, Lauzon, Mercier and more - installed by certified Greater St. Louis craftsmen who treat your home like ours.
- ✓4.9 · 88 Google reviews
- ✓0% APR financing
- ✓Lowest-price guarantee
Schedule a free estimate
Hardwood floors built for Greater St. Louis homes
Veteran Flooring is a veteran-owned shop with a showroom on Weldon Parkway in Maryland Heights, and hardwood is the work we get called for most. We install solid and engineered wood in century-old brick homes in the city, in postwar Capes across the inner-ring suburbs, and in new construction west of the river. Every job runs with our own crew, so there is no subcontracted labor and no handoff halfway through. Come walk on the Hallmark Floors, Portercraft and Fusion samples before you decide anything.
Missouri weather is hard on wood. Summer dew points sit in the 70s and winters run dry, so boards swell through August and shrink back by February. We acclimate material inside your house before a single plank goes down, take a moisture reading on the subfloor, and leave the expansion gaps the manufacturer calls for. Book a free in-home measure and we will tell you what your subfloor will actually support.

Which build belongs in your house
Both options are real wood. The question is how the board is put together and what sits under it. Older St. Louis homes are joisted, with a plywood or old pine subfloor over a basement, which is ideal for nail-down solid wood. Newer builds out in St. Charles County are often slab-on-grade, and that is engineered territory. We look at the structure first and let it make the call instead of letting a showroom display do it.
- Solid hardwood - three quarters of an inch of one species, nailed to a wood subfloor, sandable five or six times. Species and pricing are on our solid hardwood page.
- Engineered hardwood - a real wood face over a cross-layered core that holds still when humidity swings. The right answer over concrete or in a finished basement, and covered in detail on the engineered hardwood page.
- Wide planks from 5 to 7 inches, available in either build, and popular in open great rooms
- Herringbone and chevron patterns, including the white oak herringbone on our showroom floor
- Prefinished for a faster install, or unfinished so we can sand and stain it in place

Financing Through Hearth And Synchrony*
*Subject to credit approval. Applying takes a few minutes and does not commit you to a project. Ask about our veteran and first responder discounts when you schedule.
See financing optionsSpecies and stain, tested in your own light
Red and white oak run this market. Most homes around here were built with oak strip flooring, so matching new wood to old is usually straightforward. Maple reads cleaner and more uniform. Hickory takes a beating from dogs and kids without showing much. Walnut goes darker and warmer for a study or a formal dining room. Our racks carry Hallmark Floors, Portercraft and Fusion, and samples go home with you rather than staying bolted to a display.
Stain is where people slow down, and we are fine with that. Erik will sit on your floor with three or four stains, brush them out on the actual wood, and let them dry while you look at them in morning light and again after dinner. Kitchen light and late afternoon sun change a color more than any brochure admits. Homeowners mention that hour in their reviews more than anything else we do.

Installation, start to finish
We pull the old flooring, haul it away, and check the subfloor for flatness and moisture before anything new goes in. Squeaky joists get screwed down. Low spots get leveled. Baseboards come off and go back on so you are not left with quarter round hiding a rough cut. Nail-down, glue-down or float depends on what is underneath. If your existing wood only needs sanding and fresh coats, we will say so, because refinishing is often the better and cheaper answer.
Homeowners in Webster Groves, Kirkwood and University City call us most often about oak that has been buried under carpet since the seventies. Pulling that carpet back is usually the best half hour of the whole job. We tell you honestly whether the wood underneath is worth saving or whether replacement makes more sense, and then we put one written number on it.

What hardwood costs in Greater St. Louis
Installed pricing with material and labor together, including tear-out and haul-away of the old floor. A free in-home measure turns these ranges into one written number.
| Option | Typical price | Notes |
|---|---|---|
| Engineered oak, 5 inch, factory finish | $8.00 - $9.50 / sq ft | Common colors, good starting point |
| Mid-range engineered, wider plank | $9.50 - $11.50 / sq ft | The whole-house favorite |
| Solid red or white oak, prefinished | $9.00 - $12.00 / sq ft | Sandable for decades |
| Wide plank engineered, wire-brushed | $11.50 - $14.00 / sq ft | 7 inch and up, 3mm wear layer |
| Solid hickory, walnut or site-finished oak | $12.50 - $16.00 / sq ft | Custom color, no factory bevel |
Moisture testing, subfloor prep, baseboard removal and reinstall, and disposal of the old floor are all in the quote. Stairs and trim work are priced separately.
Hardwood Flooring - frequently asked questions
A whole main level usually runs two to four days for a straight install. Add a couple of days if we are sanding and finishing on site. We work in zones where the layout allows, so you keep a bathroom and a bed to get to, and we send photos at the end of each day so you know where things stand without having to ask.
Kitchens, yes, with either build, as long as spills get wiped up. Basements are a different story. Below grade, concrete gives off moisture year round, so we put engineered wood or a waterproof plank down there and keep solid hardwood on the levels above. We have seen too many solid floors cup in a basement to recommend otherwise.
A solid oak floor over a sound subfloor can go eighty years and take five or six sandings along the way. Engineered runs thirty to fifty years and will usually take one or two sandings, depending on the wear layer thickness. Either way you are buying decades, not seasons.
Usually within a shade or two, and we bring boards to your house to prove it before anything gets ordered. If the old and the new sit in the same sightline, the cleaner fix is sanding everything at once and finishing it as one floor. We price it both ways so the decision is yours.
Explore related flooring options
From the first call to the final sweep
Working with Veteran Flooring
Tell us what you have
Call {{phone}} or send us the rooms and square footage. We will set a time at your place, or you can stop by the showroom.
Measure and quote
Erik measures, checks the subfloor, and writes one price for the whole project, back to you within one business day.
Install with the owner on site
We protect the house, prep the subfloor, and lay the floor. {{ownername}} is there while the work happens.
Walk it and stand behind it
We clean up, walk every room with you, and back our labor for a full year on top of the manufacturer warranty.

Reviews
4.9 stars from 88 Google reviews, written by homeowners across Greater St. Louis.
Read what they said →
Free estimate
We measure the space and get one written price back to you within one business day.
Schedule yours →
Services
Installation, hardwood refinishing, repair, tear-out and subfloor prep, for homes and commercial spaces.
See what we do →What we stand for
What we hold ourselves to
The owner on site Dale Wyatt is on your job while the work happens. Questions about a transition, a stain color, or what we found under the old carpet get answered by the person accountable for the floor.
One honest number Erik measures the rooms and checks the subfloor before he quotes, so the written price covers the whole project. It does not grow halfway through the install.
Certified craft We are certified by the National Wood Flooring Association, bonded and insured, and our team carries more than 80 years of combined experience in this trade.
You hear from us You get a schedule, progress photos while the crew works, and a straight answer the day something under the old floor changes the plan.

Take a peek
See it in a real room
Browse hardwood, refinished oak, luxury vinyl and tile we have installed in {{areaName}} homes, then bring your favorites by the showroom.
Right around the corner
Serving families across Greater St. Louis
We work out of Maryland Heights and cover the city, mid-county, and St. Charles County: century-old brick two-flats, postwar ranches, and new builds alike. One hallway or the whole house, we will come look at it and give you a straight price.
- Maryland Heights, MO
- St. Louis, MO
- St. Charles, MO
- O'Fallon, MO
- St. Peters, MO
- Chesterfield, MO
- Florissant, MO
- Wentzville, MO
- Wildwood, MO
- University City, MO
- Ballwin, MO
- Kirkwood, MO
- Webster Groves, MO
- Hazelwood, MO
- Creve Coeur, MO
Good to know
Straight answers about your floor.
Here is what homeowners in {{areaName}} ask us most: view our full FAQ
Fresh off the press
Industry guidance at your fingertips
Request a consultation
Meet with one of our skilled project specialists to get started
Featured Brands & Technologies
















